ISO/IEC Identification cards — Recording technique is a set of nine ( to ) standards describing the recording technique on identification cards. Cartes d’identification — Technique d’enregistrement —. Partie 1: Estampage. STANDARD. ISO/IEC. Reference number. ISO/IEC (E). BS ISO/IEC is one of a series of International Standards describing the parameters for identification cards as defined in the terms.
|Published (Last):||2 December 2008|
|PDF File Size:||16.28 Mb|
|ePub File Size:||17.9 Mb|
|Price:||Free* [*Free Regsitration Required]|
This document is one of a series of International Standards describing the parameters for identification cards as defined in the terms and definitions clause and the use of such cards for international interchange. Lso is the purpose of this document to provide criteria to which cards shall perform.
Physical Plastic Card 2.
Recording Density bits per inch. Below will be found a brief synopsis of some Magnetic Strip Encoding Standards.
The layout of embossed characters in this area is not intended to interfere with TIM. This table is only an overview of what data fields are contained on the three tracks of a magnetically coded driver’s license.
ISO – Card & Tickets Manufacturing
Isso sent to secretariat or FDIS ballot initiated: Note from the table below that Magnetic Stripe Readers used for acquiring Credit Card data need only to read tracks 1 or 2 from the card. While the information contained on each track may be only slightly different, the field order, field lengths, and method of field separation and termination differs significantly. Check out our FAQs. Information Content including control characters.
Account Number Expiration Date. Character Configuration including parity bit. Low density data is still recorded on track 2 for compatibility with older-technology readers and provide redundancy when reading with newer-technology readers.
It takes into consideration both human and machine aspects and states minimum requirements. The embossed characters lso intended for transfer of data either by use of imprinters or by visual or machine reading.
Call Abacus 21 for further details. ISO defines the physical characteristics of the card. The information below is abstracted from these standards. Note also the redundancy:.
Final text received or FDIS registered for formal approval. This document specifies requirements for embossed characters on identification cards.
BS ISO/IEC 7811-1:2018
Life cycle A standard is reviewed every 5 years 00 Preliminary. Magnetic Strip Encoding Standards. Readers with both track 1 and 2 are recommended for acquiring Credit Card data since redundancy permits the authorization process to compare account information on both tracks and also fallback to the lower density track data if the reader is unable to decode track 1 due to damaged track data on the card.
Tracks 1 and 3 read alphanumeric data at bpi, while track 2 reads numeric data only at 75 bpi. Lower-density data recorded on track 2 contains only the account number and expiration date.
No consideration is given within this document to the amount of use, if any, experienced by the card prior to test. Site Search Upcoming Events. Using either system is correct but intermixing or ieo values can result in errors.
Physical Dimensions of Cards: Monday to Friday – The original design was made using the Imperial measurement system. Full copies of these standards can be pruchased from www. Account Number Name Expiration Date. Track 3, originally an alternate numeric-only track, is no longer used in the Banking and Credit Card format.
In the early years of Magnetic Stripe technology, data was recorded at lower density to increase read-reliability. The data is read least significant bit first. ISO Specification – No longer in use.